How to reserve a faucet for the washing machine?
Renovation is a headache for most consumers, especially the decoration of the bathroom. All kinds of excuses should be reserved, especially the necessary faucets such as washing machines and bathtubs. How to reserve them? The author introduces you today: First, prepare the installation tools, check whether the supporting parts are complete before installation. Common faucet parts include: hoses, rubber washers, showers, water, kidnappers, decorative caps, etc.
First of all, it is best to initially select the model of the drum washing machine you need and study the size. If you can, of course, the faucet is better near the water inlet of the washing machine.
In order to achieve optimal use of the home space, this design should be based on space. How to put the washing machine to save space and use space is the first thing you should consider.
After considering the spatial distribution, determine the position of the faucet. The faucet position is best than the size of the washing machine when it is allowed. In the future, you will need to replace a larger washing machine in the next few years.
The faucet is not lower than the height of the washing machine. The specific height is not required to be demanding. It is better to stand and operate comfortably, so that it can adapt to various types of drum washing machines or other forms of washing machines. Do not bury the faucet's interface in the wall, as it sometimes encounters the problem of replacing the faucet. In fact, even if the faucet can be connected to a lower position, it is best not to do that. Who wants to bend and release the water? The drum type washing machine has a water receiving position that is better on the side of the washing machine. The height is generally around 1100~1300cm.
1. Use the special faucet of the washing machine and plug it directly.
2. Use ordinary faucet: the length of the inlet pipe of the washing machine is generally about 1m. One end is connected to the washing machine, and one end is connected to the faucet. The connection to the washing machine is very simple. Place the inlet pipe connection seat vertically on the inlet valve and screw it clockwise. The connection with the faucet is as follows: Step 1: Hold the connector with four screws in one hand, pull down the buckle of the inlet pipe with one hand, and separate the connector from the inlet pipe; Step 2: Confirm the white in the connector After the plastic guide sleeve and the black rubber pad are intact (if the faucet pipe diameter is too thick, the plastic guide sleeve can be removed), loosen the four screws on the connector, and rotate the upper and lower connectors to leave 3- 4 thread gap; Step 3: Connect the connector horizontally to the faucet and tighten the loosened four screws; Step 4: Tighten the 3-4 threaded connectors reserved in advance to the watertight .
If it is a fully automatic washing machine, it is generally unnecessary to close it after opening, plus there is a certain water pressure, so there must be no water leakage. Generally, you should choose a threaded faucet, which is basically foolproof after tightening. However, if it is an ordinary two-cylinder washing machine, because there is no pressure, it can be used as usual when washing clothes. The general faucet can be used.
The LED Indicator is a device that monitors the operation or position of an electrical device with light. The indicator light is usually used to reflect the working state of the circuit (with or without electricity), the operating state (running, outage or test) of the electrical equipment, and the position status (closed or disconnected).
In our company,mainly have eight series(as follow):
AD22-22DS LED Indicator
AD22-4SMD LED IndicatorAD16 LED Indicator
AD22-22MSD Buzzer
AD22-30DS LED Indicator
AD22-DAV Current Voltage Indicator
AD22-DAM Current Indicator
AD22-DVM Voltage Indicator
LED Indicators,LED Indicator Light,LED Indicator Lamp,LED Indicator Bulbs
Ningbo Bond Industrial Electric Co., Ltd. , https://www.bondelectro.com